Quick Start Guide – AP-7216 DVR
•
5JKL/EDIT:
The 5JKL/EDIT button works as numeric [5] and letter [JKL]. The 5JKL/EDIT
button is used to edit text fields. When editing text fields, it will also function as a Backspace
button to delete the character in front of the cursor. On checkbox fields, pressing the
EDIT/IRIS+ button will
tick
the checkbox. In Playback mode, it can be used to generate video
clips for backup.
•
6MNO/PLAY:
The 6MNO/PLAY button works as numeric [6] and letter [MNO]. It is used to
enter the Playback menu. It is also used to turn audio on/off in the Playback menu.
•
7PQRS/REC:
The 7PQRS/REC button works as numeric [7] and letter [PQRS]. It is also used
to enter the Manual Record interface.
•
8TUV/PTZ:
The 8TUV/PTZ button works as numeric [8] and letter [TUV]. It is also used to
enter the PTZ Control mode.
•
9WXYZ/PREVIEW:
The 9WXYZ/PREVIEW button works as numeric [9] and letter
[WXYZ]. It is also used to switch between single screen and multi-screen mode.
•
0/A:
The 0/A button works as numeric [0]. It is also used to switch between input methods
(upper and lowercase alphabet, symbols and numeric input). It can also be used to clear entire
masked areas, such as in the Motion Detection and Privacy Mask menus.
•
SHIFT:
The SHIFT button is used for switch button action between numeric button and
control button.
4.
DIRECTION/ENTER Buttons:
•
DIRECTION Buttons:
The DIRECTION buttons are used to navigate between different fields
and items in menus. In Playback mode, the Up and Down button is used to speed up and slow
down recorded video. The Left and Right button will select the next and previous day of
recordings. In Preview mode, these buttons can be used to cycle through channels.
•
ENTER Button:
The ENTER button is used to confirm selection in any of the menu modes. It
can also be used to
tick
checkbox fields. In Playback mode, it can be used to play or pause the
video. In Single Play mode, pressing the ENTER button will advance the video by a single
frame.
5.
IR Reciever:
Receiver for IR remote.
Note:
It is important to note that you must click the EDIT button on either the remote or front panel on a text
field before you’re able to edit its content. After you’re done entering text, you must hit the ENTER button to be
able to move on to the next field.
