Step 4: Check DEBUG log
[1]According to the information in 'Interfaces', select the RS232-USB cable or TTL-USB cable
Images Burning
1.Function Introduction
Miivii burning tool, suitable for Miivii series products.The tool has two main functions: burn images and clone images. You can burn the official
image of Miivii power for Miivii devices using an X86 architecture PC as the burn host. After developing a Miivii device for some time, you can
save your progress by cloning an existing device images and burning it to other Miiivii devices.
2.Prepare Software And Hardware
2.1. Burn The Host Ready
It is necessary to connect the writing host to the Miivii device to burn the images. The recommended figuration of the write host is as follows:
CPU uses Intel core series processors with X86 architecture
Memory 8GB DDR3 and above
Spare hard disk capacity 40G and above
The system is Ubuntu Linux X64 v16.04 or V18.04
2.2. Prepare Miivii Burn Tools And Miivii Device Images
Low for a link:
https://en.miivii.com/index.php?s=index/category/index&id=119
Download the Miivii burn tool
Download the Miivii device image and the image MD5 value
Store the above files in the same path as the burn host
Supports simultaneous burning of multiple identical devices, but does not support simultaneous burning of multiple different devices
Note: The file storage path cannot contain Chinese characters or special characters
2.3. Prepare The Hardware
Miivii equipment and power, USB data cable
3. The Operation
3.1 Hardware Connection
Connect the writing port of Miivii device to the writing host through USB data cable
3.2 Use of Software
3.2.1. Images Burn
Copy the images and MD5 values to the imGS folder of the burn tool
Go to the bin folder of the burn tool and open the Burn tool "MVflasher"
