A
P
E
X
D
I
G
I
T
A
L
H
T
-
1
7
0
8
GOOD
NOTICE
SETTING UP YOUR UNIT
• Turn off the power and unplug both units before setting up any connections.
• Please refer to the user’s manual of the connected TV.
• If you connect the unit to a video cassette recorder (VCR), or TV/VCR combinations, the playback picture might be distorted
because all DVD unit incorporate copyright protection circuitry by Macrovision.
• Keep the unit away from any tuner or radio to avoid any static or distorted sound interference from a broadcast.
• Due to the wide dynamic range of sound output of the unit, adjust the volume of your receiver to a comfortable listening level to
avoid any speaker damage.
Connecting to a TV
Step 1: Connect the RCA cable (red & white) from audio outputs of the unit to the TV Audio Inputs.
Step 2: connect the RCA cable (yellow) from the video output on the back of your unit to the TV Video
Input. (For TV that support S-video Input please follow the diagram to the right).
BETTER
Yellow
Red
White
TV Video Input
TV Audio Input
TV’s S-video input
(Optional Cable)
Connect the unit with an optional S-Video cable, if
the TV has an S-Video input. Do not connect the
yellow video cable if using the S-Video cable.
During connecting,
do not connect the
S-Video output and
YPbPr component
output terminals
simultaneously.
BEST
When connecting YPbPr, do not connect S-Video simultaneously.
Component Video Output
Component video output terminals when connected to
selected TV and monitor will produce a highter picture
quality. Depending on the selected TV and monitor, the
wording of the component input terminals may vary. If
there are any fluctuations with the color played back,
adjust the TV or monitor to achieve the best audio and/or
picture.
Pr
Pb
Y
White Red
TV’s Audio
Input
White
Red
Y, Pb, Pr can only output video signals when the unit
is in DVD mode.
S-Video can only output video signals when the unit
is in DVD mode.
Summary of Contents for HT-170
Page 26: ......
