Troubleshooting Guide
SYMPTOMS AND CORRECTION
Symptom
No power
No picture
No sound
Rolling b/w picture
Black & White picture
The playback
picture has
occasional distortion
Brightness is unsta-
ble or noises are
produced on play-
back pictures
The unit does not
start playback
MP3 won’t read disc
or it skips
The remote control
does not work prop-
erly
Correction
• Connect the power plug into the wall outlet securely.
• Verify the connection from the DVD video output to the TV video input. Then switch TV to
appropriate mode (video 1).
• Connect the video cable into the jacks securely. Refer to your television owners manual.
• Connect the audio cables into the jacks securely.
• Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch
to the appropriate source on the receiver. Refer to your audio amplifier owners manual.
• From the Setup Menu select “TV Type”.
• Adjust the vertical hold on your TV.
• Damaged S connector (bent pin).
• A small amount of picture distortion may appear because of a poor quality video/sound trans-
fer to disc. This is especially true of some discs manufactured between 1997-1998..
• Scratched disc.
• Connect the unit directly through the TV and not through any other source. What you’re view-
ing is the effect of the copy protection circuitry required on all units.
• If you don’t have a video input on your TV, you must purchase an RF adapter from your deal-
er.
• Place the disc with the graphics side up.
• Place the disc on the disc tray correctly inside the guide.
• Make sure the disc is free from scratches & fingerprints.
• Press the SETUP button to turn off the menu screen.
• Cancel the parental lock function or change the parental lock level.
• Turn the power off then disconnect the power plug and reinsert it back into the wall outlet. Retry
again.
• Reburn disc as the software edition used may not be compatible with the unit. Check web site
for instruction.
• Check web site for instruction on availability of a firmware upgrade.
• Use new editions of software such as Voyetra Audiostation 4, Adaptec’s “Easy CD Creator” or
NTI or Roxio’s Toast Titanium.
• Make sure MP3 file are not encoded with a variable bit rate such as provided by Real
Networks.
• Replace the batteries with new ones.
• Operate the remote control within about 7m.
A
P
E
X
D
I
G
I
T
A
L
H
T
-
1
7
0
24
Summary of Contents for HT-170
Page 26: ......
