17
A
P
E
X
D
I
G
I
T
A
L
H
T
1
0
0
Amplifier Volume Control
1. On the front panel, ALL Channels are simultaneously adjusted by using the Volume control.
2. On the Remote Control, press VOLUME - and to adjust the volume.
3. To adjust each speaker channel volume separately, press VOLUME MODE. Current level is displayed on screen.
Continue to press VOLUME MODE to access and adjust surround channels, center channel, subwoofer channel or
all channels.
AM/FM Tuner Settings
1. The default setting status of the HT-100 is DVD Playback.
2. To access the radio tuner press FUNCTION button.
(Each press will access in order: DVD—>Tuner—>AV1—>AV2—>DVD)
3. To change FM or AM band, press AM/FM button on remote control while in Tuner Mode.
4. Connect the supplied FM & AM Antennas.
5. To enter a station frequency directly, use number key. (IE. 94.7Mhz —press 947). If unwanted, press CLEAR
button.
Amplifier Volume / AM/FM Tuner Settings / AV 1 & 2
Read thoroughly before attempting to store any radio stations. Ht-100 stores 50 FM and 20 AM stations.
1. Press GOTO from the remote control. The tuner will automatically search and store all local stations with good
signal strength.
2. Press to scan back or forward to a desired radio station with good signal strength. To scan in increments
press the direction keys.
3. Press to select stored frequencies in sequential order.
4. To number your stored numbers, press SETUP, input the station number, then press SETUP again.
Storing Channels in Memory
The HT-100 allows for the hookup of other Audio/Video components such as a VCR or Satellite System. Refer to the
manual that accompanies each Audio/Video component.
AV1 / AV2 With Pro Logic
NOTE
When using a Hi-Fi Stereo VCR, Pro Logic Decoding is available.
