Apex Digital AIC400 Series User Manual Download Page 4

Mounting

Panel Mount (standard)

Rack-mount (optional)

Wall-mount (optional)

Environment

- Operating temperature: -20 to 60ºC

- Storage temperature: -20 to 80°C

- Humidity 0-95% RH, non condensing 

Protection

- Front Panel: IP41

- Enclosure: IP20

Connections 

All connections are via pluggable heavy-duty 

connectors suitable for 28-16AWG conductors rated 

at 8A@300V

Model Number Description 

Model #: AIC4xx

AIC4

32

V1

VU

Vn

 RGY  X1

P

RGY is the standard LED Color set

(See page 2 for special options)

Auxiliary Relay

X0:

 Without

X1:

 With

Signal Voltage

V0:

 Dry Contact

V1: 

24VAC/DC

V2: 

48VAC/DC

V3:

 125VAC/DC

V4:

 250VAC/DC 

V5:

 Others (Specify)

B1

Integral Audible

B0:

 Without

B1:

 Buzzer

B2:

 Vocal

  Serial Communication

C0:

 Without

C1:

 With (Non-Isolated)

C2: 

With (Isolated)

No. of Alarm 

Points

(channels)

04, 08, 12, 16,

20, 24, 28, 32, 

36, 40, 44, 48

C0 E0

Event Recorder

E0:

 Without

E1:

 With

Power Supply #2

Vn:

 Not Applicable

V1:

 24VDC

V2:

 48VDC

VU:

100-260VAC/DC

V5:

 Others (Specify)

     Mounting

P:

 Panel-mount

     (Standard)

R:

 Rack-mount

W:

 Wall-mount

Power Supply #1 

V1:

 24VDC

V2:

 48VDC

VU:

100-260VAC/DC

V5:

 Others (Specify)

Alarm Sequences

All the standard alarm sequences are supported by 

the AIC400 as defined in the ISA S18.1/1979 

including:
- Manual Reset (M)

- Automatic Reset (A)

- Automatic Reset First Out (F3A)

- Automatic Reset First Out (F1A)

- Manual Reset First Out (F2M-1)

- Ringback (R)

- No Lock In

You can see the flow charts of these sequences at the 

end of this document.

AIC400 Series Alarm Annunciator

Expandability (option)

The AIC400 can be expanded up to 10 units to cover 

higher numbers of alarm points.

Auto Mute Timer

The AIC400 has an Auto Mute Timer for unmanned 

applications. This feature mutes the internal buzzer 

and horn output relay automatically after a preset 

time. 

Event Recording (optional)

In order to track the sequence of events in a process, 

the AIC400 can be supplied with integral Event 

Recording option with up to 1ms resolution and 

Accuracy.

Built-in Buzzer

The standard system is supplied with an integral 

buzzer programmed with two different tones for 

Critical and Non-critical alarms. System can also 

support the second integral buzzer and four external 

horns for different applications.

(4)

Summary of Contents for AIC400 Series






















Reviews: