Under Tools menu, click on the “Version” and enter ‘aic400’ as your password and then select
‘No’ for saving request. The main page will pop up automatically as shown below.
The AIC400 Annunciator comes with a flash drive. There are two EXE files in this folder
(CDM21228_Setup.exe and ALCON.exe).
1 - Copy the APEX-Annunciator folder from the flash drive on your laptop.
2 - Run the CDM21228_Setup.exe. When the driver is successfully installed, then go to the next step.
3 - Connect your laptop to the Annunciator with the USB cable
4 - Power on the Annunciator
5 - Run the ALCON software
The Windows Security System and/or other security software on your computer may prevent the ALCON
to run as this is an Executable (EXE) file. Please make sure to allow this to run.
When you run the ALCON
for the first time
, this menu will pop up:
AIC400 Series Alarm Annunciator
Note:
Run the CDM21228_Setup.exe
before connecting the USB cable
.
(16