A P E X D I G I T A L
A D V - 3 8 0 0
3
17
.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as contact with them might be fatal.
18
.Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of
fire or electric shock.
19
.Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
20
.Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
Warning: This unit should only be serviced by an authorized and properly trained technician. Opening the cover or other
attempts by the user to service this unit may result in serious injury or death from electrical shock, and may increase the
risk of fire.
21
.Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by
the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or damaged in any way, and
f. When the product exhibits a distinct change in performance - this indicates a need for service.
22
.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
23
.Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
24
.Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
25
. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves or other products
(including amplifiers) that produce heat.
Important Safety Instructions
UNPACKING
First check and identify the contents of your Combo Player package, as listed below:
VCR&DVD Player 1
AUDIO cable(red and white) 1
Video cable(yellow) 1
Batteries(AAA) 2
Remote control 1
RF(Radio Frenquency)Antenna Cable 1
User’s manual 1
If any item should be damaged or missing, please inform your dealer without delay.
Keep the packaging materials, you may need them to transport your player in the future.
WHERE TO PALCE YOUR Combo Player
A. Place the unit on a firm, flat surface.
B. When you place this combo player near a radio, or VCR, the playback picture may become poor and/or distorted.
In this situation, move the Combo player away from the other units.
C. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free space all around the player for
proper ventilation.
TO OBTAIN A CLEAR PICTURE
The Combo Player is a precision device. If the optical pick-up lens, disc drive parts and head are dirty or worn down,
picture quality can become poor. We recommend regular inspection and maintenance every 1,000 hours of use
depending on the operating environment.
Note:
The OSD and illustration in this manual may be somewhat different from the actual situation.
Please take the unit as the standard.
