A P E X D I G I T A L
A D V - 3 8 0 0
12
• Press
VCR
button to change into
VCR
Mode and follow the
procedures below.
1 Press the
SETUP
button on the remote control.
2 Press the
ENTER
button, while highlighting CLOCK SET.
3 Set the current date and time with
button or
NUMBER button.
For DATE SET, follow the order of Month/Day/ Year ; for TIME
SET, follow the order of Hour/Minute in CLOCK SET screen.
4 Press
SETUP
button after completed.
VCR Setting
1 In VCR mode press the
SETUP
button on the remote control .
2 Press the
button to select the “Program Set” and press
ENTER
button.
3 Select “Channel”
• move into desired channel signal with up
/down
button
channel signal change like the orders below.
cable
video 1
video 2
Antenna
4 Select “Start Date”
• Move into “Start Date “with
button and then, select the
desired number to record with up/down button or number button
5 Select “REC cycle”.
• Move into “REC Cycle” with
button and then, select the
desired one with up/down button
• REC cycle changes like the orders.
One Time
weekly
weekdays
Daily
6 Select Start Time
• Move into “Start Time” with
button and then, select the
desired number to record with up/down button or number
button.
7 Select End time
• Move into "End Time" with
button and then, select the
desired number to record with Up/down button or number
button.
8 Select Tape Speed
• Move into "Tape Speed" with
button and then, select the
desired one with up/down button
• Recording speed changes like the orders below.
SP
SLP
• Press
SETUP
button to exit after completion.
• Press NEXT and PREV button to fisnish 8-event programming.
• Press the POWER button to activate timer recording.
• Only operating in stop mode.
• Press
VCR
button to change into VCR mode and follow the
procedure below.
1 Press the
SETUP
button on the remote control.
2 Press the
button to highlight and select (Enter) the
“Channel Set”.
3 Selecting cable or antenna viewing
• You must set the viewing mode for your VCR, choosing either
CABLE (cable system connection) or ANTENNA(antenna
connection). To set the viewing mode:
• Press
ENTER
to toggle between CABLE and ANTENNA.
4 SELECT “Manual Set”
Move into “Manual set” with
button to select one of add and
erase with
ENTER
button. Memorize channel and select the
desired channel when
ENTER
button is pressed, “Erase”
converts into “Add”.
Press
NUMBER
button and
/
button of remote control to
select the desired channel to memorize.
To check the memorized channels, press
CH+/-
button on
remote control. To delete Channels Manually, when
ENTER
button is pressed, “Add” converts into “Erase”. Press
NUMBER
button and
/
button on the remote control to select the
desired channel to delete.
To check the deleted channels, press
CH+/-
button on remote
control.
5 SELECT “Auto Preset”
• Press
button in Channel Set to highlight “Auto Preset”
• Press
ENTER
button to detect the channel automatically.
1 Press the
SETUP
button on the remote control. The initial
MENU is displayed.
2. Press the
button to select the “Language Select” and
press
ENTER
button
3 Select the language among English, Spainish and French.
Clock
Program
Channel
On-Screen Menu Language
