AH-New
condensing air handling unit
APEN GROUP SPA reserves the right to make changes deemed to be required to its products or documentation
22
code HG0310.05GB ed.A-2010
AH
23
code HG0310.05GB ed.A-2010
AH
10:15
Mon 01 Jan
Monday
Cm
0
3
6
9
12
15
18
21
24
Ec
An
10:15
Mon 01 Jan
F1
F2
F3
M
START/END
Change Monday
Cm 07:00 / 17:00
N 00:00 / 00:00
N 00:00 / 00:00
OK
4.1.4.
TEMPERATURE SETPOINT
The temperature setpoints are the following:
•
Comfort (Cm)
20.0° C
•
Economy (Ec)
12.0° C
•
Antifreeze (An)
2.0° C
•
Neutral Area (Xd)
0.5° C
10:15
Mon 01 Jan
Economy (Ec) °C
Antifreeze (An)
°C
Neutral area (Xd) °C
Comfort (Cm) °C
Set. Temperatures
20.0
12.0
2.0
0.5
OK
4.1.5.
CONTROL SETPOINT
Inside the main "MENU" page it is possible to select the Setpoint
adjustment sub-menu for the system.
10:15
Mon 01 Jan
MENU
Time Ranges
System
Settings
Mode
Setpoint
Adjustment
The setpoints default settings of the different controls are the
following:
• T_SNOW
3.0
°C
(SNOW Contr.)
(Not Used)
• SET_SNOW
23.0 °C
(SNOW Contr.)
(Not Used)
• SNOW_PREX 200 Pa
(SNOW Contr.)
(Not Used)
• PREX_MIN
90
Pa
(PRES. Contr.)
(Not Used)
• PREX_MAX
200 Pa
(FILTER Contr.)
• PREX_MAX2
250 Pa
(FILTER Contr.)
•
SPEED_MIN
10
km/h (WIND Contr.)
(Not Used)
•
SPEED_MAX 80 km/h (WIND Contr.)
(Not Used)
10:15
Mon 01 Jan
SET_NEVE
PREX_NEVE
PREX_MIN
T_NEVE
Setpoint
OK
3.0
23.0
200
90
Pa
Pa
°C
°C
The different setpoints and their meaning are shown
afterwards in the sections of the relating controls.
NOTE: Some of the above Setpoints refer to system
types other than “Hot Air Heater” systems and, for this
reason, they will not be considered.
4.1.6.
INPUT MENU
By entering this menu by pushing the key, it is possible to
(for all inputs):
•
Display the temperatures “measured” by the probes
connected;
•
Display to which input a certain probe is connected and
what reference has been associated to such probe;
•
Detect any reading error;
•
Correct the probe reading value by means of an offset
parameter.
10:15
Mon 01 Jan
HOME
°C
20.7
SET: 20.0°C
PID: 000 %
