17
INSTALLATION
AMFTC72SS
A Switched Fused Connection Unit to BS 1363 Part 4 is
recommended
The fuse must be rated at 32 Amps.
The wires in the mains lead are coloured in accordance
with the following code:
Brown = L - Live
Blue = N - Neutral
Green and Yellow = - Earth
The connection point must be placed in a position adjacent
to the appliance so as to be readily accessible for an
engineer in the event of a breakdown.
Disconnect the appliance from the mains supply before
carrying out any kind of maintenance or cleaning.
FIXING THE DOUBLE OVEN
VENTILATION
An air circulation slot that should be cut into the plinth if
It is essential when installing your oven there is adequate
air circulation around the appliance to ensure the correct
operation of the appliance. Inadequate air circulation will
greatly impair the operation of the appliance and can
affect surround cabinets due to the rise in temperature.
2mm
10mm
10mm
200mm
Upper vent
Once the oven has been lifted into place insert the 4x
plastic washers into the holes located within the sides of
the metal casing of
the oven as shown
and secure with 4x
screws [Ø4mm x
25mm].
Also ensure that you
adjust the furniture
doors adjacent to the
sides of the oven so
there is a 5 - 7mm
gap between them,
otherwise heat
displaced from the
oven might damage
the furniture door.
THE APPLIANCE IS NOW READY TO USE.
