Table of Contents
© 2014 Apeks
Attaching the Crotch Strap to WTX Harness
1.
Install
retainer loop
onto the non-looped end of the webbing with loop seam facing inward. Place the
flat end of the d-ring on the angled side of the plastic 3-bar slide.
Weave the webbing through, starting
from the top side of the plastic 3-bar slide as shown below.
2.
Place the WTX harness with the Apeks logo (on the
backpad) face up on a flat surface. Feed the webbing
bottom to top through the plastic sewn in
crotch strap
retainer
on the bottom of the WTX harness.
3.
Wrap the webbing around the
crotch strap retainer
and back through the 3-bar slide and d-ring
(now containing two strands of webbing). Adjust the crotch strap to desired length and tighten when
finished. The extra webbing (tail) can be inserted and secured in the retainer loop
.
Loop Seam
Retainer Loop
Crotch Strap
Retainer