Multiple Metal Grommets for Book Screw Kit
Each buoyancy cell has two sets of central metal grommets
that give you the option of mounting book screws. These
may be used to secure the WTX harness, WTX backplate
or ultralight plate to the buoyancy cell, preventing excessive
movement between the two components.
•
WTX harness use 3/4” book
screw kit
(PN 388113,
sold separately).
•
Ultralight plate and WTX backplate use 3/8” book
screw kit
(PN 388112, sold separately).
Tank Stabilizer
Each buoyancy cell comes with a tank stabilizer located
between the oval grommets. This feature prevents the
tank from rolling side to side, allowing it to stay in its
intended position.
Table of Contents
© 2014 Apeks
CAUTION:
Please note that the 18 lb, 30 lb and 40 lb buoyancy cells are intended for
use with single cylinders only and are not intended to be used with twin cylinders.
WTX-D SINGLE CYLINDER BUOYANCY CELL
Multiple Metal Grommets for Nut and Bolt Attachment
Single cylinder buoyancy cells also have multiple sets
of central metal grommets that give you the option of
mounting with nuts and bolts. These may be used if your
single cylinder is equipped with a single cylinder adapter
that has two bolts 11 inches (28 cm) apart on center.