Installation Manual: The Bambino™ and The Transformer™
17
Revision Date 4/9/2019
3.3.3.2.
CO
2
Bottle Connections
– There are two different sets of CO
2
bottle connections. One set
(consisting of two bottle connections) is used to both supply CO
2
to the system and are
intended to be recovered back into. The other set (one bottle connection) is intended only
to supply the system with any additional CO
2
needed, no CO
2
will be recovered into this
bottle. Supplied hoses should be connected directly to the CO
2
cylinder valves. No
regulator is required. A supplied CGA-320 plastic gasket is required to seal the connection
between the hose and the CO
2
cylinder. See Figure 8.
PUMP
INLET
PUMP
OUTLET
Figure 7:
Extraction Stand to Diaphragm Compressor hook up
