11
3.
For Porcelain Sink:
Porcelain enameled sinks can readily be chipped if care is not exercised when
drilling the hole. Before starting the drill motor, apply firm downward pressure on the bit until a
crunching occurs. This will help keep the drill bit from walking when starting the hole. A small pilot
hole will also aid the drill bit.
Note:
Immediately after the hole drilling is done, clean up all metal chips, for
metal chips will
stain the porcelain!!
Fig. 9A
If your faucet comes without tubing attached:
Option: Mounting The Faucet with Metal Compression Fitting & Separate Faucet Tubing
1. Mount the faucet as shown in
Fig. 9B (Page 12).
2. Make sure the tube insert is
pushed all the way
into the tubing
Fig. 9C
(
Page 12
).
3. Make sure the tubing is
inserted
inside the faucet stem at least 1/4” deep while screwing the
compression nut
Fig. 9D
(
Page 12
).
Step 4: Mounting The Faucet
If your faucet comes with tubing attached:
1. Mount the faucet as shown in
Fig. 9A.
2. Connect the
Clear faucet tubing directly to
system output.
3. The faucet handle controls the flow of purified
water exiting the faucet. Turn the handle to
horizontal position to release the water and
vertically to shut off.
Note:
For stainless steel sinks, we recommend
reversing the black locating washer
so the flat end is facing upwards for
proper installation.
Tubing
Counter Top
Counter Top
Opening
Chrome Base
Lock Washer
Lock Nut
Black Locating Washer
Small Black
Rubber Washer
Black Rubber Washer
