APDM Opal V2R, User Manual

Page: 28 / 49

28
Synchronized Logging Mode
In the synchronized logging mode, multiple sensors can be wirelessly synchronized with each other. Each sensor’s data
will be recorded to the on-board flash memory.
To Start Recording
Undock the sensors after configuration. After a few seconds, they will start recording to their flash memory. When
within wireless contact with each other, they will synchronize their clocks. To start an additional recording in a
separate file, connect and disconnect the sensors from their cables or Docking Stations. No re-configuration is
necessary.
To Import Recorded Data
Dock the sensor(s). Click on the “Convert” button in the toolbar. You can specify regions of the logged data to
convert to HDF format (identical to the streamed data format) based on time ranges or button events.
Low Power Logging Mode
In the low power logging mode, each sensor’s radio is turned off to save power. The sensors will be synchronized at
the start of recording, but they will not be actively synchronized while logging and some level of clock drift will occur
during long recordings.
To Start Recording
Undock the sensors after configuration. The sensors will stop recording once they are docked again.
To Import Recorded Data
Dock the sensor(s). Click on the “Convert” button in the toolbar.
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info