APDM Moveo Explorer, User Manual

Page: 25 / 51

25
RUNNING A TEST
1. Click on the subject you wish to test. Click on the
“New Test” button on the top right of your
screen.
2. Select the test(s) and condition(s) you would
like to run. You may select multiple tests or one
predefined test sequence. Click Next to continue.
3. Make sure the necessary sensors are undocked
and attached to the subject on the proper body
sites. All sensors and Access Points should be
blinking green in unison. Click Next to continue.
4. Follow the instructions on each dialogue box to
complete each test. Subject instructions should be
read out loud, and Administrator instructions
should be referred to for more information
5. If using the wireless remote, press the forward
button to start and stop each test.
Tip: Your subject should remain still during the 3
second countdown at the beginning of the tests for
proper calibration. Calibration pose instructions can
be found in the Moveo Explorer software.
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info
Parts
Setup M.L. How to
M.L. Software Download Troubleshooting
Hardware Config
Tech Stats/Info