25
AUXILIARY OUTPUT REAR PANEL CONNECTORS
TRS 1/4” Insert Points
The 10k
Ω
unbalanced inputs and 100
Ω
unbalanced outputs are used to insert external signal processing
(EQ, Limiters, etc) or effect devices into the auxiliary signal path.
NOTE: The user should ensure that any device inserted into the Aux bus is capable of maintaining the signal
integrity of the console. The device must be able to accept a +22dBu signal without clipping, and have an
output impedance of 100
Ω
or less and be capable of d22dBu into a 2k
Ω
load.
XLR Balanced Output
This is an 100
Ω
electronically balanced line level output on an XLR connector designed to drive a 600
Ω
load
or greater. The Polarity reverse switch located at the Aux fader will reverse the polarity of this XLR connector.
HEADPHONE CONNECTORS
A 1/4” and a 1/8” set of headphone connectors are located under the armrest (right of master section) plus
this additional 1/4” Headphone connector located on the rear of the console.
