13
MONO INPUT - AUXILIARY SEND SECTION
Aux 1-4 & 5-10 Pre-Source Switches
These switches select the “Pre” signal source for Aux 1-4 and Aux 5-10 between Pre-fader and Pre-EQ. These
switches are relevant only when the associated (4) Aux Pre-Source (Pre-Src) switches are depressed. The
default Pre-EQ source is internally set to Post-insert. A qualified technician can change this to a Pre-insert or
Pre-high-pass filter setting.
Aux 1-4 Post-Fader/Pre-Source
This switch selects the signal source for Auxes 1-4 between Post-fader and Pre-Source (as just determined
above).
Aux Level Controls 1-4
Controls the mix level of the channel into Aux buses 1-4.
Aux 5-6 Post-Fader/Pre-Src
This switch selects the signal source for Aux 5-6 between Post-fader and Pre-Source.
Aux 5-6 Stereo Switch
Reconfigures the individual Aux 5 and 6 controls from two level controls to a pan control (5) and a level
control (6). This enables a stereo mix to be generated from within the Aux send section for use with stereo
headphones, effects, or a discrete stereo mix for recording or broadcast use.
Aux 5 Level Control
When in normal mono mode, controls the signal level feeding Aux mix bus 5. When the Aux 5-6 stereo
switch is depressed, this control is now reconfigured into a pan control, which adjusts the balance of signal
being fed to mix buses 5-6.
Aux 6 Level Control
When in normal mono mode, controls the signal level feeding Aux mix bus 6. When the Aux 5-6 stereo
switch is engaged, this control becomes the Aux 5-6 signal level and is fed to the pan control.
Aux 7-8 Post-Fader/Pre-Src
This switch selects the signal source for Aux 7-8 between Post-fader and Pre-Source.
Aux 7-8 Stereo Switch
Reconfigures the individual Aux 7 and 8 controls from two level controls to a pan control (7) and a level
control (8). This enables a stereo mix to be generated from within the Aux send section for use with stereo
headphones, effects, or a discrete stereo mix for recording or broadcast use.
Aux 7 Level Control
When in normal mono mode, controls the signal level feeding Aux mix bus 7. When the Aux 7-8 stereo
switch is depressed, this control is now reconfigured into a pan control, which adjusts the balance of signal
being fed to mix buses 7-8.
Aux 8 Level Control
When in normal mono mode, controls the signal level feeding Aux mix bus 8. When the Aux 7-8 stereo
switch is engaged, this control becomes the Aux 7-8 signal level and is fed to the pan control.
Aux 9-10 Post-Fader/Pre-Src
This switch determines the signal source for Aux 9-10 between Post-fader and Pre-Source.
Aux 9-10 Stereo Switch
Reconfigures the individual Aux 9 and 10 controls from two level controls to a pan control (9) and a level
control (10). This enables a stereo mix to be generated from within the Aux send section for use with stereo
headphones, effects, or a discrete stereo mix for recording or broadcast use.
Aux 9 Level Control
When in normal mono mode, controls the signal level feeding Aux mix bus 9. When the Aux 9-10 stereo
switch is depressed, this control changes to a pan control adjusting the signal being fed to mix buses 9-10.
Aux 10 Level Control
When in normal mono mode, controls the signal level feeding Aux mix bus 10. When the Aux 9-10 stereo
switch is engaged, this control becomes the Aux 9-10 signal level and is fed to the pan control.
Discrete Sub Woofer Feed
Using Aux Sends
Any Aux bus may be used as a
mixed feed to a subwoofer system
since any of the Aux sends can be
assigned from the master section
to any of the primary outputs
including MONO, the suggested
output for subwoofers. The Left-
Right, Center, and Mono outputs
are controlled from a single VCA
fader maintaining balance
between all outputs.
