APART SDQ5Pir, Instruction Manual

Page: 11 / 20

Instruction manual SDQ5PIR
9
Operating settings:
SDQLVL is the volume level of the speaker system. Possible values
are: OFF (mute = -64) or any value between -63 (lowest) and 0
(highest volume level). E.g. you want to set the volume to -20: “
SET
SDQLVL -20 <CR> ”
The unit will reply: “
SDQLVL -20<CR>
”
MAXLVL is the maximum allowed volume level. E.g. if you don’t
want anyone to set the SDQ level higher than -10, set the
MAXLVL
parameter to -10. All volume related commands will ALWAYS be
related to the
MAXLVL setting. E.g. if the MAXLVL is -10 and you
enter the command “ SET SDQLVL -20<CR> ”, the SDQ5PIR will set
the level relative to the MAXLVL , which was -10.
Please note that the absolute maximum number of volume steps is
limited to 64 steps. 1 volume step corresponds to 1.25 dB.
The MAXLVL parameter is therefore considered as the master
volume. If you want to mute the speaker, you can set the MAXLVL
parameter to OFF.
BALANCE sets the balance between left and right channel. Possible
values vary between -31 and 31.
Equalizer:
EQBASS sets the level of the bass.
EQTREB sets the level of the treble.
The value must be between -14 and 14 in steps of 2. If a different
value is used (e.g. “5”), it will be changed to the closest match.