APART REVAMP1680, Instruction Manual

Page: 7 / 16

Instruction manual REVAMP1680
7
• This unit has NOT been designed for use in mobile applications,
such as: mobile discobars, mobile PA systems, Live bands, audio
rental systems, …
• Removable rack-ears
This amplifier is equipped with 2 stereo bus inputs with
passthrough. These bus inputs are ideal when you want to hear the
same audio signal in different output zones. For example: zones 1
to 4 use bus 1 input. Zones 5 to 7 use bus 2. Zone 8 is set to line
in and uses its own input signal. In this case, set the input selector
for zone 1 to 4 to bus 1, from zone 5 to 7 to bus 2 and zone 8 to
line in.
The trigger input is ideal when you want to switch on the power
amplifier automatically using an external AC or DC trigger signal
coming from your audio system. The amplifier will be switched on
as long as the trigger voltage is present. Alternatively, you can set
the power on mode switch to the audio trig position: the amp will
automatically switch on when a sufficiently strong audio signal
is present at the input. The input sensitivity for the audio trigger
function is 15 mV on all inputs. After a few minutes of silence, the
amplifier will automatically switch itself off.