E n g l i s h
| 30
Daily cleaning of the oven cooking chamber washer must be carried out with a non-abrasive detergent to
guarantee its proper functioning.
Any fats and food residues in the cooking chamber could catch fire when using the oven, therefore, it is
advisable to remove them promptly.
Only use products recommended by the manufacturer of the appliance
7.2.
External and display care and cleaning
To clean the outside of the oven using a damp cloth with warm water and products suitable for cleaning
steel. Do not use acidic products or ammonia.
ATTENTION: never clean the device with water jets or pressurised steam.
CLEANING THE DOOR AND THE DOOR INTERNAL GLASS
To clean the door internal glass wait until the oven has completely cooled down. You simply have to turn
the blocks which lock the inner glass. Then rotate the glass. In this position, with the glass still hinged, you
can thoroughly clean the entire door.
WATER INLET FILTER CLEANING
To clean the water inlet filter, unscrew the cap on top of the filter and remove it (in this operation remove
the inner filter also). Rinse thoroughly with plenty of water. Reassemble the filter.
DISPLAY CLEANING AND CARE
Clean the display daily. Clean it with a piece of paper and with a special spray for
glass. Avoid contact with sharp materials that can ruin the screen. Avoid cleaning
it with water jets or steam under pressure.
7.3.
In case of failure
It is advisable to have the appliance subjected to periodical checks (at least once per year) by a specialist,
authorised technician.
Any maintenance, installation or repair work must be carried out by qualified, authorised personnel by
contacting the Customer Service. Before carrying out any operation the appliance must be disconnected
from the mains power supply, turn off the water mains taps and wait for it to cool down.
Before moving the appliance from its position, check that the electricity and water connections (electric
cables, water pipe and drainage) have been properly disconnected.
If the appliance is on wheels check that the electric cables, pipes or anything else are not damaged while
moving it. Ensure the brake is on. Avoid placing the oven near heat sources (such as fryers, etc.).
After carrying out the task and returning the appliance to its initial position, check that the electric and
water supplies are connected correctly.
If the appliance breaks, disconnect it from the mains power supply and turn off the water.
Before contacting Customer Service, check the chart below.