Manual AP silage cutter
FL
A
P Machinebouw B.V.
- 7 -
4.
INSTALLATION:
4.1
Transport instructions:
If the AP silage block cutter is transported detached from tractor / mini loader,
the cutting frame always must be closed. This is a precautionary measure to
avoid injuries to limbs by the tines and / or knives of the AP silage block cutter
and to avoid damaging to the hydraulic cylinders. Make sure that the parts of
the hydraulic system (including the hoses) cannot be damaged.
If you want to transport the AP silage block cutter on a lorry or similar there
are two possibilities:
1:
You place the AP silage block cutter on a pallet, lash it and move it with
a forklift truck on the lorry.
2:
You lift the AP block silage cutter with the help of a hoist on the lorry.
WARNING:
Use solid hoisting equipment and always attach the
hoisting belts in a way, that the AP silage block cutter
remains stable.
During transport on the road the customer must pay particular attention to the
lighting of the AP silage block cutter (see safety regulations).
4.2
Assembly instructions:
The AP silage block cutter is delivered fully operational by
AP Machinebouw
B.V.
,
including quick attachments for your front loader or mini loader. There
are no further specific assembly regulations.
A
P Machinebouw B.V. denies all responsibilities for replacement of spare
parts by the user and as a result warranty will no longer apply. Replacing of
spare parts must be exclusively done by the AP dealer.
4.3
Hydraulic connections in combination with front loader / mini loader :
To operate the AP silage cutter your front loader / mini loader only requires
one double functioning control valve.