Manual AP silage cutter
FL
A
P Machinebouw B.V.
- 8 -
5.
USE OF THE AP SILAGE BLOCK CUTTER IN COMBINATION WITH
FRONT LOADER / MINI LOADER:
5.1
Coupling:
Because coupling systems for front loaders and mini loaders are not uniform it
is not possible to completely
describe the action “coupling” in this manual.
For safety and general instructions with regard to the coupling of the AP silage
block cutter we refer to the manual of your tractor, front loader or mini loader.
We do mention some general important safety and operating instructions :
WARNING:
Always couple the AP silage block cutter to the front
loader before you connect the hydraulic hoses.
WARNING:
Never stand between the tractor / mini loader and the
AP block silage cutter without having switched off the
engine and having engaged the parking brake.
WARNING:
Make sure that the hydraulic system of the AP silage
block cutter cannot be damaged in any position of the
front loader / lifting arms of the mini loader.
5.2
Using the AP silage cutter:
For using the AP silage cutter the following instructions must be followed
accurately and in chronological order :
1
Start position: closed cutting frame,
2
Put the tines of the AP silage cutter horizontally at the height at which
you want to take out the silage,
3
Once the cutting frame has reached the highest position put the vehicle
in neutral position and open the cutting frame completely,
4
Make sure the silage block cutter is positioned in such a way the
horizontal front knife overshoots the silage, see image 3,
WARNING:
If you want to take out feed from the
floor, make sure the tines cannot grab in
the ground or in any other way can get
stuck behind obstacles.
Image 3:
Height during take out
