13
8. When the sleep timer expires system will start cooling down the
hot air gun by blowing maximum air while the display shows a
flashing OFF to signify system is cooling down and preparing to go
into sleep mode. Once actual temperature goes below 90 degrees,
the display “B1” would show “ - - - “ three dashes indicating
soldering iron is now in sleep mode.
9. To wake the soldering iron from its sleep mode, adjust the hot air
gun temperature or press the hot air gun function button or simply
lift the hot air gun from its holder.
K. Selecting the Temperature Scale
The displayed temperature can be toggled between the centigrade
scale or the Fahrenheit scale.
To switch between the two scales follow these procedures:
1. Follow System Setting procedures 1 to 6. Adjust system
selection menu to “3”, then press the hot air gun increase
temperature adjustment button “B3”.
2. If successful the display would show “C ” indicating system scale
setting is being set.
3. Select the system temperature scale with the hot air gun increase
and decrease temperature adjustment buttons “B3 and B2”.
Select “C” for Celsius scale and select “F” for Fahrenheit scale
4.
Save the selected temperature scale settings and exit from the
temperature scale adjustment menu by pressing the soldering
iron function switch “A4”.
5.
The system’s temperature scale will change to the selected
temperature scale and settings saved into system memory.
OPERATING GUIDELINES
