User Manual AW5145W
www.aosong.com
Revision V1.0-May 2017
- 8 -
"192.168.001.010".The value"192" is displayed in highlight state. Press "OK" key, then the
value "192" will be twinkling and now you can press the "UP" key or "DOWN" key to change
its value. Press the "OK" key to finish setting .Then press the "UP" key or "DOWN" key to
change the other three values.
Note: The network address manually set can not be the same as the network address of
other network nodes in the LAN. Otherwise, it will cause communication failure.
3)Set the "Subnet Mask" (default 255.255.255.0) and "Default Gateway" (default
192.168.1.1) options as described above. After setting, enter the "Start configuration" option,
prompting "Press OK to start configuration".
4)Refer to the "get IP address automatically" mode Step 3) 4) 5) to configure.
5.3.2 Communication Mode setting
(1)Long press the “OK” key to unlock the screen.
(2)Press "MENU" key to enter the setting menu, select "Net Setting", press "OK" key to enter
the submenu and select "Server Type", press the "UP" key or "DOWN" key to select TCP or
UDP, press "MENU" key to finish.
5.3.3 Server Address Setting
(1)Long press the “OK” key to unlock the screen.
(2)Press "MENU" key to enter the setting menu, select "Network Setting", press "OK" key to
enter the submenu and select "Server Address" to set. The default Server address is
14.23.92.147, do not need to modify.
5.3.4 Server Port Setting
(1)Long press the “OK” key to unlock the screen.
