User Manual AW5145W
www.aosong.com
Revision V1.0-May 2017
- 6 -
display screen will be locked automatically. There is a lock screen symbol on the top left of
the screen.
5.2 LCD Display Unlock
The display will be automatically locked if the device does not make any key settings within
30 seconds. To unlock the screen, press the "OK" button to unlock, then you can setup the
menu.
5.3 Network Setting
5.3.1 Router Configure
Transmitter can connect to the router when successfully obtained the SSID and password of
the router by "AOSONG cloud platform APP". Then the transmitter can connect to the
Internet.
There are two ways to configure the router, "get IP address automatically" and "set
IP address manually". Normally, only "get IP address automatically" is used, and "set IP
address manually" is used only when the IP address of the device need to be static.
(1)The steps to connect to the router by "get IP address automatically "mode are shown as
follows:
1)Long press the “OK” key to unlock the screen.
2)Press "MENU" key to enter the setup menu, select "Net Setting", press "OK" key to enter
the submenu and select "Router Config", press "OK" key to enter the submenu and select
"Auto IP".
3)Press the "OK" button, then the screen prompt "Press OK To Start". The mobile phone
which install the "AOSONG cloud platform APP" and device should connect to the same
router. Open the "AOSONG cloud platform APP" after the mobile phone connect to the
router successfully. "SSID" indicates the name of the router that the mobile phone is
currently connected to. Enter the router password in the "Password input box", select the
number of transmitters to be configured in the "Device number", and then click "OK" to start
configuring. The configuration interface are shown as below:
