AOR AR-ALPHA, Operating Manual

Page: 83 / 160

81
In the CW mode, signals are recorded as mono.
Quality of playback sound may be degraded as compared with the original signals even if recorded
in the WFM mode or WAM mode.
The receive mode should not be changed during the recording process.
Never turn the main power switch off during recording, or loss of the recorded signal will result.
To play back the recorded signal properly, select the same receive mode as when signals were
recorded.
When DVR memory channels are all full, no further recording can be done.
8-2-1 Recording
1. Press the key to start recording.
2. The DVR will capture data beginning 6 seconds prior to the record key being pressed.
3. A red bullet and a white recording progress indicator will appear on the LCD.
8-2-2 Stop recording
1. Press the key while recording.
2. The red round icon will be changed to CUE .
8-2-3 Playback audio
1. Press the key, then press the key.
2. The color of the soft keys will change.
Clear blue --- Recorded (saved)
Dark blue --- Channel not used (empty)
(Example)
Channel 0 Grey Recorded
Channel 1 Blue Empty
Channel 2 Blue Empty
Channel 3 Blue Empty
Channel 4 Blue Empty
Channel 5 Blue Empty
3. Press the desired (recorded) channel soft key to play back audio.
(On the above example, the key is available for playback.)