AOR AR-ALPHA, Operating Manual

Page: 69 / 160

67
Item Operation
① MODE:NFM Receive mode
① IFBW:15k Receiver IF bandwidth
①
M01-22
Bank 01, Channel 22
①
399.462500 MHz
Memory channel frequency
① MemCh01-22 Memory channel text
①
VOICE Decoding mode: VOICE
DTMF: AAAA DTMF decoded data
①
M01-00Mem Ch01-00 398.030M Scan List
① Cursor
①
Current receive channel
Display during memory scan
While scanning, the blinking appears instead of memory channel frequency.
 scanning
If more than one memory channel is programmed into the current memory bank, when an ‘active’ channel
has been located (busy, so the squelch opens), the scan process will temporarily pause on the active
channel, and the memory location will be displayed along with any accompanying text.
Soft key operations
Read the memory channel at the cursor.
Move the cursor to the recently scanned channel.
Clear (delete) the scan list.
5-3-1 Changing scan direction
Scanning direction can be changed by rotating the main dial.
5-4 Selecting a scan bank
To select another memory bank for scanning, use the numeric keypad to enter 4 digits.
(Example: Select bank 02)
If no data is available, the next bank with valid data will be recalled (empty memory banks are skipped).
To exit from the
SCAN mode, press the VFO key.