AOR AR-ALPHA, Operating Manual

Page: 70 / 160

68
5-5 Bank Link
The AR-ALPHA has a built-in Bank Link function to allow scanning a single bank or a user-selected group
of memory banks.
5-5-1 Setting Bank Link
1. Press the
key, then press and hold the
key for 2 seconds.
2. The Scan Group screen will appear.
Group: 00 Scan group number 00, 01 ~ 19
Delay: 2.0s Scan delay time 0.1 ~ 9.9s (in 0.1 second steps)
Free: OFF Scan free time OFF (00), 01
～
60 seconds
3. Rotate the sub dial to select the desired item, then use the or key to change.
4. Validate with “Group Set” soft key or the MHz key.
Press the key if you prefer to cancel.
5-6 Select Scan
Select scan enables you to ‘tag’ memory channels to make a temporary list up to 50 channels in the same
memory bank for scanning in a separate list called the SELECT SCAN LIST.
5-6-1 Adding select scan channels in memory read
1. Press the key to enter the memory mode.
2. Locate the memory channel to add select scan channel.
3. Press the key, then press the key.
4. The ‘SEL’ icon will appear on the LCD.