manualshive.com logo in svg

AOpen OpenBook 1556, Service Manual

Share
Download
AOpen OpenBook 1556 Service Manual Download Page 25

Chapter 1

17

Hot Keys

The computer employs hot keys or key combinations to access most of the computer’s controls like screen 
contrast and brightness, volume output and the BIOS Utility.

To activate hot keys, press and hold the 

Fn

 key before pressing the other key in the hot key combination.

Hot Key

Icon

Function

Description

Fn-

l

Hot key help

Displays a list of the hotkeys and their functions.

Fn-

m

Sleep

Puts the computer in Sleep mode, which can be defined 
via the advanced section of the Power Management 
Properties in the Windows Control Panel.

Fn-

n

Display toggle

Switches display output between the display screen, 
external monitor (if connected) and both the display 
screen and external monitor.

Fn-

o

Screen blank

Turns the display screen backlight off to save power. 
Press any key to return.

Fn-

p

Speaker on/off

Turns the speakers on and off; mutes the sound.

Fn-PgUP

Home

Functions as the “Home” key.

Fn-PgDn

End

Functions as the “End” key.

Fn-

x

Brightness up

Increases the screen brightness.

Fn-

z

Brightness down

Decreases the screen brightness.

Summary of Contents for OpenBook 1556

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands