AOpen Fortress 1120, User Manual, Page: 55 / 60

43
Standard rack
For mounting the rack model in the standard rack, two fitting brackets
must first be mounted at the carrier rails. Spring nuts must also be
inserted in the support uprights. The spring nuts are used for fixing the
carrier rails and securing the server at the front.
1 Review the installation instructions in the standard rack
documentation.
2 Mark the position of the attachment points of the server on the
support uprights (1 HU).
3 Place the spring nuts in the groove of the support uprights at the
marked attachment points.
4 If necessary, adjust the position of the nuts in the groove until they
lock into the correct position.
Fortress 1120 ug - EN .book Page 43 Monday, February 17, 2003 3:41 PM