AOpen Fortress 1120, User Manual, Page: 35 / 60

23
2 Connect the server power plug to a grounded mains outlet of the
in-house mains (for the rack model, into the mains socket strip of
the rack).
Turning on the server
After making sure that server has been properly set up and all the
required cables are connected, the server can now turned on.
To switch on the system, press the power button on the front panel.
The server performs a system test and boots the operating system.
If after switching on the server there is nothing but flickering stripes
on the screen, turn off the server immediately (see page 32).
Note: The power button does not disconnect the server from the
mains voltage. To completely disconnect it from the mains
voltage, remove the power plug from the socket.
Fortress 1120 ug - EN .book Page 23 Monday, February 17, 2003 3:41 PM