CD-WRITER IDE5232
9
3. Device Configuration Jumper
Set the jumper to Master, Slave or Cable Select according to your
system configuration.
4. IDE Interface Connector
Plug one end of the 40-pin IDE cable here to join the 40-pin IDE
connector on the motherboard. The red-edge of the IDE cable must
be connected to Pin 1 of each connector.
5. Power Supply Connector
By plugging the computer’s power supply cable here, you can
connect the CD-RW drive and your computer system.
Summary of Contents for CD-WRITER IDE5232
Page 1: ...CD WRITER IDE5232 CD ReWritable Drive User s Manual...
Page 20: ......
