65
A
A
X
X
4
4
T
T
I
I
I
I
-
-
1
1
3
3
3
3
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
******************************************************
Installing Driver During New Windows 2000 Installation
******************************************************
1.
Start the installation:
a. Floppy Install: Boot the computer with the Windows 2000 installation diskettes.
b. Floppyless Install: Boot from floppy and type "WINNT". After files have been copied, the system will reboot. On the
reboot, press <F6> after the message "Setup is inspecting your computer's hardware configuration..." appears.
c. CD-ROM Install: Boot from the CD-ROM. Press <F6> after the message "Press F6 if you need to install third party
SCSI or RAID driver" appears.
2.
When the "Windows 2000 Setup" window is generated, press "S" to Specify an Additional Device(s)
3.
Copy all directories and files in "[CD-ROM]:\Driver\Promise\20275" to floppy disk.
4.
Insert the Promise Technology driver diskette into drive A: and press "Enter" key.
5. Use
"
↑
" or "
↓
" to choose "Win2000 Promise Ultra133 TX2(tm) Controller" from the list that appears on screen, and then
press the "Enter" key.
6.
The Windows 2000 Setup screen will appear again saying "Setup will load support for the following mass storage devices:"
The list will include "Win2000 Promise Ultra133 TX2(tm) IDE Controller".
NOTE: If you need to specify any additional devices to be installed, do so at this time. Once all devices are specified, continue
to the next step -
7.
From the Windows 2000 Setup screen, press the Enter key. Setup will now load all device files and then continue the
Windows 2000 installation.
