manualshive.com logo in svg

AOpen 4-Port 10/100Mbps Ethernet Broadband Router, User Manual

Share
Download
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual Download Page 7

1 

ABOUT THIS GUIDE 

Congratulations on your purchase of this 4-port Broadband Router. This 
device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network 
capabilities in a highly flexible desktop package. It provides a complete 
solution for Internet surfing and office resources sharing, and it is easy to 
configure and operate for even non-technical users. 

Purpose 

This manual discusses how to install the 4-port Broadband Router.  

Overview of this User’s Guide 

Introduction. 

 Describes the Broadband Router and its features. 

Unpacking and Setup.

 Helps you get started with the basic installation of 

the Router. 

Identifying External Components.

  Describes the front panel, rear panel 

and LED indicators of the Router. 

Connecting the Router.

  Tells how you can connect the Router to your 

xDSL/Cable Modem. 

Technical Specifications.

 Lists the technical (general, physical and 

environmental, performance and Routers settings) specifications of the 
Broadband Router. 

 
 

Summary of Contents for 4-Port 10/100Mbps Ethernet Broadband Router










































Reviews:

No comments

Brands by name

Popular brands

Load more brands