manualshive.com logo in svg

AOpen 4-Port 10/100Mbps Ethernet Broadband Router, User Manual

Share
Download
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual Download Page 34

28 

2-2-3 Dial-up xDSL (PPPoE) 
If connected to the Internet using a Dial-up xDSL (PPPoE) Modem, the 
ISP will provide a Password and User Name, and then the ISP uses 
PPPoE. Choose this option and enter the required information, if the ISP 
provided a Service Name, enter it in the column of the Service Name field, 
otherwise, leave it blank. 
The dialog box in Service 
Name, IP Address and 
DNS Address must be 
filled up when the ISP 
Provider provide these 
information to you, if the 
ISP Provider provides 
Dynamic IP Address, 
then you can skip on 
these dialog box. 
The MTU feature 
specifies the largest packet size permitted for network transmission. Enter 
the value desired, for most DSL users, it is recommended to use 1492. By 
default, MTU is set at 1492. 
The Maximum Idle Time feature can control the connection time while 
user’s need to save the cost of connection fee from ISP provider (default 
time=0, always connect). Click on the Connect-on-demand button to dial 
up to the ISP when only on demand, while there is a need of connecting to 
the ISP automatically. 
 
 
 
 
 

Summary of Contents for 4-Port 10/100Mbps Ethernet Broadband Router










































Reviews:

No comments

Brands by name

Popular brands

Load more brands