manualshive.com logo in svg

AOpen 4-Port 10/100Mbps Ethernet Broadband Router, User Manual

Share
Download
AOpen 4-Port 10/100Mbps Ethernet Broadband Router User Manual Download Page 11

5 

UNPACKING AND SETUP 

This chapter provides unpacking and setup information for the Broadband 
Router. 

Unpacking 

Open the box of the Broadband Router and carefully unpack it. The box 
should contain the following items: 

‹

 

One 4-port High  Speed Broadband Router 

‹

 

One external power adapter 

‹

 

This User’s Guide 

If any item is found missing or damaged, please contact your local reseller 
for replacement. 

Setup 

The setup of the Broadband Router can be performed using the following 
steps: 

‹

 

The power outlet should be within 1.82 meters (6 feet) of the 
Broadband Router. 

‹

 

Visually inspect the DC power jack and make sure that it is fully 
secured to the power adapter. 

‹

 

Make sure that there is proper heat dissipation from and adequate 
ventilation around the Broadband Router.  Do not place heavy 
objects on the Broadband Router. 

 
 
 
 

Summary of Contents for 4-Port 10/100Mbps Ethernet Broadband Router










































Reviews:

No comments

Brands by name

Popular brands

Load more brands