background image

AOMWAY                                       

                        RC Vision System

 

 

 

> RF CH: Channel/Frequency selection (AUTO for automatic selection). 
> Output Power Levels: 1mw/25mm/200mw/500mw. 

> Color

change OSD info color option

red/white/yellow/black/green 

/blue

> Roll

cooperating with Radio controller

when direction is reversed

> Pitch

cooperating with Radio controller

when direction is reversed

 

> OSD: flight controller OSD data info on/off switch

 

> Plane

select your aircraft type: fixed wing or FPV racing drone. 

9. Flight Controller Interface 

 

 

1. Current working frequency                  2.Real time video signal strength 
3.Bit stream

image quality

                4. Receiver recording indicator 

5. Flight course angle                                6. Current GPS satellite numbers 
7. Radio controller signal strength            8.Flight mode (flight controller) 
9. Numbers indicating IAS

                    10. TX and RX signal connection 

11. Flight attitude                                      12. Flight altitude 
13.Transmitter current                              14. Transmitter voltage status 
15. Distance from start point                    16. Longitude 
17. Latitude 

Summary of Contents for Nexus V2










Reviews: