AOMWAY Nexus V2 User Manual Download Page 2

AOMWAY                                       

                        RC Vision System

 

 

 

1.

 

Product Introduction 

   

    Nexus  V2  is  equipped  with  high  performance  decoding  chip  and  can  do 

the  most  advanced  low  latency  algorithm  for  HD  video  transmission.  The 
whole  system  latency  is  estimated  to  be  70ms  and  reach  up  to  7km 
transmission  distance,  also  adapt  to  multiple  antennas  for  different 
application  purposes.  This  digital  link  device  enables  real  time  aerial 
photography in full HD resolution. 

          5.8GHz  high  frequency comes  with  better  anti-interference  feature  and 

guarantees high image quality. Dual signal output can do auto switch, one 
for 1080p micro HD camera and the other for HDin. It also has wide working 
voltage range 7-26V for different power supplies. The kit perfectly supports 
MAVLink protocol, can do overlapping display and set up for the OSD data 
at receiver, support both HD video recording in transmitter and receiver. 

2. Main Features 

> Resolution

  Full HD input:1080p 60fps

downward compatibility

 

Camera: 1080 25fps

downward compatibility

 

> Auto switch frequency or manual frequency setup 
> Minimum transmission latency down to 30ms 
> HD camera with HD type C port, and HD type A port 
> Transmitter antenna connector is MMCX,   

Receiver antenna connector is SMA-jack 

> Fully support all MavLink protocol flight controller, and real time display 

OSD data on screen, such as flight controller parameters, frequency, bit 
stream, transmission RSSI and recording indicator etc.   

> HD recording on both of transmitter and receiver side (MP4 format and 

every 3min to save a recording file) 

>  Advance  algorithm  for  H.264  compressed  format,  20Mbps  bit  stream 

and auto adjustment 

> High frequency transmission at 5.8GHz for perfect image quality 
> Use TF card for firmware upgrade (by manufacturer) 
> Weight:    Transmitter 60g;      Receiver 108g (not include the antennas) 
> Working environment: 0°C- 50°C 

Summary of Contents for Nexus V2










Reviews: