AOMWAY
6
RC Vision System
> When the TF card is full or there is a card error, the recording process will
be stopped
7. Digital HD Link Operation
> Transmitter and Receiver unit already bind together (factory setting).
Manual re-binding process:
Firstly, power on the receiver and then press BUT2 key for 10s, waiting
LED1 and LED2 slow flash (one flash per second), and then release the
key, it will enter into binding status. Secondly, power on the transmitter
and press BUT key for 10s, waiting both LED indicator to do slow flash,
and then release the key, it will enter into binding status. When both LED
lights on transmitter and receiver start to quick flash, it means binding
process is completed, now you will need to restart the transmitter and
receiver for normal use.
> The blue LED light on Transmitter and Receiver is made for data
communication status. Quick flash indicates normal status; slow flash
(one flash in 3s) indicates no signal input; LED light off for malfunction
and data communication is ended.
> Once the binding process is finished, restart the device will still keep the
link.
8. Menu Selection
Long press BUT1 key for 3s to enter or quit menu, short press will change
settings. Short press BUT2 will do downward selection of menu option (cycle
operation).
