6
aftersale service: [email protected]
The red indicator flashes when the headset is
not plugged in after power on, it means
recording is in progress, and the recording file
is named REC0001.WAV (Note: The red light
flashes 10 times and then keeps on in the
recording state, indicating that the memory is
full, and supports up to 9999 recording files)
When playing with headphones, press the line
control “pause” button to enter the pause
status, press the "+" key twice to enter the
delete status; press the "+" key twice again to
delete the current file, and press the "+" key
three times to delete All files. (In the delete
mode, the red and blue lights keeps on, the red
and blue lights are off during the deletion
process, and the blue lights flash quickly then
go off after the deletion is completed) (Note:
Power Off
& Save recordings
2. Built-in microphone recording
3. Delete Recording Files
Rotate the pen
cap to the left to
start recording
When saving, the
red and blue light
flash at the same
time then shut
down automatically