Important Information
— Please Read Before Use
-3-
For Veterinary use only
⚫
The video endoscope can generate intense light rays. When the distal end of video endoscope
is too close to the mucosa, strong light rays concentrating in a small area will increase the
surface temperature in consequence of long-time irradiation, and may cause ambustion when
exceeding 41
℃
. The surface temperature of video endoscope may exceed 41
℃
in a short time
and up to maximum 50
℃
when used in conjunction with its accessories. Stop using when the
lamp is burned out during operation. Blind operation will cause injury to the patient.
⚫
Burning risk may be increased when taking too long time to approach the mucosa or observe
one fixed point or advance the video endoscope too slow in a narrow lumen. To reduce the
burning risk, avoid performing fixed-point observation as far as possible.
⚫
The common injuries may be caused by endoscope operation include perforation, mucous
irritation, bleeding, infection, rupture, etc., if the endoscope is not used by following the
instruction manual, damages or malfunctions may result.
CAUTION
⚫
Do not touch the electrical connector inside the electrical connector.
⚫
Do not apply shock to the distal end of the insertion tube, especially the objective lens surface
at the distal end.
⚫
Do not twist or bend the bending section with excessive force.
⚫
Do not squeeze the bending section forcefully.
⚫
Turn the imaging processor OFF before connecting or disconnecting the endoscope connector.
⚫
Electromagnetic interference may occur on this instrument near equipment marked with the
following symbol or other portable and mobile RF communications equipment.
⚫
Before inserting the endoscope into the human body,
turn the angulation knob at the “F
”
position; ensure that the distal end can move smoothly. If encountering irregularities or
obstructions when inserting the endoscope or operating the angulation knob, do not use it and
contact
AOHUA
.
⚫
When use the endoscope together with the imaging processor, it is recommended to connect a
voltage regulator with over 1000W capacity and automatic regulation function. Do not use a
residential used voltage regulator on the endoscope.
