Use the USB cable to connect your
Anyma Phi
to your computer
in order to update its internal so ware, to edit sounds with the
PC/Mac editor, or to control it from a DAW.
First steps
Connect
your
Anyma Phi
to the mains using the included cable and
power supply. The cable must be connected to the USB port of the
power supply, and to the power supply port labeled
DC 5V 1A
of the
Anyma Phi
at the other end.
To play most sounds produced by your
Anyma Phi
, you will need to
use a MIDI keyboard or controller.
Connect
it to the
Anyma Phi
, either
through USB via its
USB Host
port, or by using a MIDI DIN cable plugged
into the
MIDI IN
port.
You will also need to
connect
your
Anyma Phi
to a mixer, an amp, speak-
ers, or headphones, using the relevant audio output ports on the back
of your
Anyma Phi
.
Now,
turn on
your
Anyma Phi
using the
power
switch
on the back. The display will light up, and
a er a few seconds you will see the main screen.
You can now
play
notes from your MIDI keyboard or controller and hear
the sound through your audio system.
If you can’t hear anything,
adjust
the volume using the
volume knob
.
Try to
change
the mbre your sound by turning any of the
parameter en-
coders
1
2
3
4
, and use the
matrix bu ons
to reach
other controls that impact your sound in some mes dras c ways. Don’t
11
Summary of Contents for anyma Phi
