Charging the transmitter and receiver
Connect the transmitter/receiver to a computer to charge the transmitter/receiver's built-in battery.
1. Connect the transmitter/receiver to an activated computer with the supplied USB-C cable.
2. When charging is finished, disconnect the USB-C cable between the transmitter/receiver and
the computer.
Wait until the battery level lamp on the transmitter goes out to indicate that charging is finished (the
battery is fully charged).
Wait until the battery icon on the receiver's LCD screen to display full power to indicate that charging
is finished (the battery is fully charged).
Precautions for Use
While charging the battery, keep the transmitter/receiver turned off. Turning on the
transmitter/receiver while charging makes the transmitter/receiver ready for power supply and
stops charging. (TBD)
Do not apply force to the transmitter/receiver when you connect the transmitter/receiver to a
computer. This may cause damage to the transmitter/receiver or the computer.
When you connect the transmitter/receiver to a notebook computer that is not connected to an
AC power source, the battery of the notebook computer may be depleted rapidly. Do not leave
the transmitter/receiver connected to the computer for a long time.
Charging the battery or the connection with customized or hand-built computers is not
guaranteed. Depending on the type of USB device used, charging may not function properly.
Operation with all computers is not assured.
The battery level lamp lights
in green after connection
USB-C
terminal
USB-C cable
