Precautions for Use
If the fur wind screen is wet, remove it from the transmitter and let it dry in the shade.
When attaching or removing the fur wind screen, be sure to hold its chassis.
Recording
Recording with the Transmitter (TX)
Use the receiver connected to a camera (or a smartphone) and the transmitter attached to the
subject's clothing for recording sound.
1. Turn on the power of the transmitter, receiver and the connected device.
After both the transmitter and receiver are turned on, the state lamp
on the receiver stays lit
in blue, indicating that a communication connection has been established between the devices and
clear audio recording is available.
If no connection is established
– the state lamp on the receiver blinks once per second, bring the
transmitter and the receiver closer to each other for another attempt. The devices may be under
influence of environmental or other factors.
2. Ensure that the state lamp on the receiver is lit, and press the record start button on the camera
(or smartphone).
Precautions for Use
Do not touch the transmitter while recording, as this will cause the noise generated when
touching to be recorded.
If the transmitter is placed near speakers/headphones, a high pitched noise may be heard
(howling effect). This is caused by the transmitter catching sound from the
speakers/headphones repeatedly. In this case, place the transmitter as far as possible from the
speakers/headphones.
改为发射器
