32
″
LCD TV VA320E
5
2. Operating Instructions
2.1 The Use of Remote Control
POWER: Press to turn on/off the TV from or to standby mode.
INPUT: Press to select TV/COMP1/COMP2/AV/HDMI1/HDMI2/HDMI
SIDE/VGA
TV: Press to select TV input
AV: Press to select AV input
COMP: Press to select COMPONENT1/ COMPONENT2 input
HDMI: Press to select HDMI1/HDMI2/HDMI-SIDE input
Number Key: 1. Press number button to direct access to TV channel
2. Press the pass code to activate the factory mode
3. Press to activate the Channel Lock (enter PIN code for
Channel lock)
4. If channel list OSD active – jump to that channel in the
channel list (not tune the channel until OK is pressed)
- Dot button: Use the button for digital channels.
LAST: 1.Press to alternate between the currently viewed program
and previously viewed program
2. Press to return previous level and exit OSD
INFO:
To display information of TV channel or input source
INPUT: 1. The Source List should be activated and show on OSD.
2. Press repeatedly to select the signal source.
3. 1
st
press displays current, subsequent presses advance
VOL +/ -: Press to adjust the volume
MUTE : Interrupt the sound or restore it.
CH +/ - : 1. Press to browse channels
2. Press to turn on TV from stand by mode
3. The channel number should appear on the set
MENU/SELECT: Press to activate OSD menu and activate the
setting/selection of OSD
Cursor Key: 1. Press button to navigate OSD menu
2. Cursor right key perform confirmation as well as proceed
next level of OSD
PIP: Function not available
SWAP:
Function not available
EXIT: Exit OSD
PAUSE:
Function not available
PLAY:
Function
not
available
STOP: Function not available
