AOC PB20C, Service Manual

Page: 11 / 81

10
USE OF THE REMOTE CONTROL
USE OF THE REMOTE CONTROL
Teletext function and buttons will describe on next page.
TEL
TELETEXT
MENU
Press repeatedly
to display OSD menu.
SLEEP
With this key you can set
a time period after which
the TV should switch itself
to standby. Press the key
repeatedly to select the
number of minutes. The
counter runs from
0,30,60,90,120 minutes.
The timer begins to count
down from the number of
minutes selected after the
display has disappeared.
POWER:
Press to turn on/off the TV.
The TV is never completely
powered off unless it is
physically unplugged.
0~9 DIGIT BUTTONS
To select a TV channel.
TV/VIDEO
Select your input source:
press repeatedly to select
TV,
AV, S-VIDEO or SCART
mode, according to where you
connected your external
source.
VOL
Press + or
– (or
MENU
or button) to
adjust the volume.
MUTE
Temporarily interrupt the
sound or restore it.
CH
Press or (or MENU
▲
or
▼
button) to brows
through the TV channels
which are not erased.
PRE-CH
To display the previously
selected TV channel.
SOUND
To select Mono/ Stereo /Dual
from TV RF input.
PC
Select your input
source to PC.
DISPLAY
(1) Display Channel number
when use RF input.
(2) Display input source when
use other input except TV
RF input.
SIZE
2
Includes 3 modes. Press
repeatedly to select
4:3: to
16:9 (Linear) / 4:3 to 16:9
(non-Linear) / 16:9 (option).
SWAP
1
Press to swap the two
screens when PIP is work
(option).
PIP/POP
3
Press to enable the screen of
Video on Graphic (option).
SUBPAGE
Teletext Subpage function.