5
VIDEO CABLE
Connecting the Video Cable:
the LCD monitor comes with a built-in video
cable. Plug the signal cable
′
s 15-pin connector into the computer's video port
and tighten the two screws on the cable connector.
Connecting the Power Cord:
Plug the power cord into the LCD monitor's AC
power socket. Then plug the power cord into a grounded AC outlet or UL-
approved power strip or the power output socket on your PC.
Caution:
If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
Figure 2 Connecting Cables
1.
Signal Cable
3.
AC Power Cord
2.
DC-Jack Power Cable
4.
External Adapter
CONTROLS AND CONNECTORS
Summary of Contents for LM-510
Page 23: ...22 P N 41A401 969...
