background image

3

Englis

h

Important Information

WarnIng 

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE CHOC ELECTRIQUE, 

NE PAS OUVRIR

PRECAUCION

RIESGO DE CHOQUE ELECTRICO

NO ABRIR

This symbol is intended to alert the user to the 

presence of insinuated “dangerous voltage” 

within the TV’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock to 

persons. 
This symbol is intended to alert the user to the 

presence of important operating and maintenance 

(servicing) instructions in the literature accompanying 

the TV.

To reduce the risk of fire or electric shock, do not expose this TV to rain 

or moisture, the TV shall not be exposed to dripping or splashing and 

no objects filled with liquids, such as vases, shall be placed on the TV. 

CaUTIon 

To prevent electric shock, do not use this polarized AC plug with an 

extension cord, receptacle or other outlet unless the blades can be 

fully inserted to prevent blade exposure. 
Use the Wall-Mount bracket or TV stand which was recommended by 

AOC, and please consult your dealer for detailed information.
Use with other Wall-Mount Bracket or TV stand may cause instability 

and possibly result in injury. 

noTIfICaTIon 

fCC Class B radio frequency Interference Statement

Warning: (for fCC CerTIfIed modelS) 

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment 

generates uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. 

However, there is no guarantee that interference will not occur 

in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver.

 

Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected. 

 

Consult the dealer or an experienced radio/ TV technician for help. 

Pursuant to FCC regulations, you are cautioned that any changes 

or modifications not expressly approved in this manual could void 

your authority to operate this equipment.

For details concerning safety precautions, see “Important Safety 

Instructions” and “Important Usage Instructions” below.

Please keep the factory default settings as shipped, in which the 

product can meet Energy Star requirements.

Important Safety 

Instructions

1)  Read these instructions.  

2)  Keep these instructions. 

3)  Heed all warnings. 

4)  Follow all instructions.

5)  Do not use this apparatus near water. 

6)  Clean only with a dry cloth. 

7)  Do not block any the ventilation openings. Install in accordance 

with the manufacturer’s instructions. 

 

)  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 

produce heat.  

 

)  Do not defeat the safety purpose of the polarized or grounding-

type plug. A polarized plug has two blades with one wider 

than the other. A grounding type plug has two blades and third 

grounding prong. The wide blade or third prong is provided for 

your safety. If the provided plug does not fit into your outlet, 

consult an electrician for replacement of the obsolete outlet. 

10   

)  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus. 

11   

)  Only use attachments/accessories specified by the 

manufacturer. 

12   

)  Use only with a cart, stand, tripod, bracket, or table specified 

by the manufacturer, or sold with the apparatus. When a cart is 

used, use caution when moving the cart/apparatus combination 

to avoid injury from tip-over.

13   

)  Unplug this apparatus during lightning storms or when unused 

for long periods of time. 

14   

)  Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, 

such as power-supply cord or plug is damaged, liquid has been 

spilled or objects have fallen into apparatus, the apparatus has 

been exposed to rain or moisture, does not operate normally, or 

has been dropped.

15   

)  If any liquid or solid object should fall inside the cabinet, unplug 

the TV immediately and have it checked by qualified service 

personnel before operating it further. 

16   

)  Avoid operating the TV at temperatures below 32°F (0°C).

17   

)  If the TV is transported directly from a cold to a warm location, 

or if the room temperature changes suddenly, the picture may 

be blurred or show poor color due to moisture condensation. In 

this case, please wait a few hours to let the moisture evaporate 

before turning on the TV. 

18   

)  The TV shall be connected to a mains socket outlet with a 

protective earthing connection.

19   

)  The mains plug or appliance coupler is used as the disconnect 

device, the disconnect device shall remain readily operable. 

20   

)  CAUTION – These servicing instructions are for use by qualified 

service personnel only.  To reduce the risk of electric shock, 

do not perform any servicing other than that contained in the 

operating instructions unless you are qualified to do so. 

e

NERGY

 S

TAR

Summary of Contents for LE24H138

































Reviews: